Cressida Forums
Would you like to react to this message? Create an account in a few clicks or log in to continue.

1UZ Swap Thread for the MX83

3 posters

Go down

1UZ Swap Thread for the MX83 Empty 1UZ Swap Thread for the MX83

Post by Luis R Mon Apr 20, 2015 1:56 pm

Hi everyone, about 2 weeks ago I bought my first Cressida MX83. I've already begun the 1UZ swap and here is how it goes so far...


I've pulled out the old 7MGE with a bad head gasket and cleaned up the engine bay in preperation for the new heart. I will be more descriptive with lots of photos so it will be easy for everyone else who is thinking about doing this swap. For the moment I might be having to use the automatic transmission unless I can get my hands on an r154 or w58.

1UZ Swap Thread for the MX83 100_1410

1UZ Swap Thread for the MX83 100_1411

1UZ Swap Thread for the MX83 100_1412

What a MESS pig Anyways, off to the car wash to spray this thing down!

1UZ Swap Thread for the MX83 100_1413

1UZ Swap Thread for the MX83 100_1414

1UZ Swap Thread for the MX83 100_1415

1UZ Swap Thread for the MX83 100_1416

That's way better! Notice I removed a lot of the brackets around the engine bay, If I removed a bolt I would put it right back in the same place I took it out from, in effort to not lose a single piece!


I found a donor LS400 previously in an accident that ran good, picked up this bad boy for $700.00!
1UZ Swap Thread for the MX83 14292811

Stay tuned for more swap Very Happy Very Happy Very Happy Very Happy

1UZ Swap Thread for the MX83 100_1417

Luis R

Posts : 4
Join date : 2015-04-13

Back to top Go down

1UZ Swap Thread for the MX83 Empty Re: 1UZ Swap Thread for the MX83

Post by forgottenzone Sun Jan 10, 2016 1:09 am

And then...
forgottenzone
forgottenzone

Posts : 76
Join date : 2013-07-29
Location : New Jersey USA

Back to top Go down

1UZ Swap Thread for the MX83 Empty Re: 1UZ Swap Thread for the MX83

Post by jonesyGT2 Fri Apr 01, 2016 9:12 pm

No and then!

jonesyGT2

Posts : 2
Join date : 2014-11-02
Location : NSW

Back to top Go down

1UZ Swap Thread for the MX83 Empty Re: 1UZ Swap Thread for the MX83

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum