WTB 5MGE water outlet/thermostat housing
2 posters
Page 1 of 1
WTB 5MGE water outlet/thermostat housing
right now my problem is this:
Snapped a bolt in the thermostat housing. I tried soaking it in PB blaster, vicegrips, slotting it and using a screwdriver, and a bolt extractor. The extractor bit snapped off inside the pilot hole in the bolt. Whatever metal the extractor bit was made of is too hard for my designed-for-drilling-metal drill bits to even scratch, so I can't even drill it/tap it. Anybody have one?
Snapped a bolt in the thermostat housing. I tried soaking it in PB blaster, vicegrips, slotting it and using a screwdriver, and a bolt extractor. The extractor bit snapped off inside the pilot hole in the bolt. Whatever metal the extractor bit was made of is too hard for my designed-for-drilling-metal drill bits to even scratch, so I can't even drill it/tap it. Anybody have one?
Similar topics
» WTB [AUS or USA] 5mge intake cam shaft housing
» 5mge water hose
» X8 Dead in the water. No CEL even in KOEO?
» MX73 Steering column housing, center console
» 5MGE Parts F/S
» 5mge water hose
» X8 Dead in the water. No CEL even in KOEO?
» MX73 Steering column housing, center console
» 5MGE Parts F/S
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|