new member

View previous topic View next topic Go down

new member

Post by bronzeriver on Wed Mar 20, 2013 1:22 am

hello, my name is Ryan, and im from northern california. Ive been driving my cressida since about 2009, and was a member of tc.net up until recently. this looks like its replacement. hopefully ill be able to help folks out and see what others are up to.

[img][/img]

bronzeriver

Posts : 14
Join date : 2013-03-20

View user profile

Back to top Go down

Re: new member

Post by bronzeriver on Thu Mar 21, 2013 6:20 pm

Its been about a week since i put new cam seals,rear o rings and cam carrier gaskets on my 5m, oh and a new tennessee gasket. so far, no leaks of any kind.

bronzeriver

Posts : 14
Join date : 2013-03-20

View user profile

Back to top Go down

Re: new member

Post by bronzeriver on Fri Mar 22, 2013 3:34 am

the only issue ive been having is setting ignition timing, it will run, but it misses at idle. I bridged the diagnosis port, set the crank to 0 and line up the marks on the distributor,and it seems the pick-up isnt lining up with the rotor. so im scratching my head, while my motor runs all retarded. any guidance appreciated.

bronzeriver

Posts : 14
Join date : 2013-03-20

View user profile

Back to top Go down

Re: new member

Post by 7m4Lyfe on Sat Mar 23, 2013 8:19 pm

try out jzxproject,com

7m4Lyfe

Posts : 5
Join date : 2013-03-04

View user profile

Back to top Go down

Re: new member

Post by bronzeriver on Mon Apr 01, 2013 9:01 pm

i solved my problem, it wasnt how i set the cams or the crank, the distributor was off,and i took the car off the battery to reset everything.

bronzeriver

Posts : 14
Join date : 2013-03-20

View user profile

Back to top Go down

Re: new member

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum