HomeX7 Fitment Thread
+3
reynolds_brad
RayRay
MitchBrock
7 posters
Page 1 of 1
X7 Fitment Thread
by MitchBrock Tue Nov 26, 2013 3:27 pm
enkie 92's 15x7 0 offset with 205/50 in front and 205/55 in rear
MitchBrock- Posts : 16
Join date : 2013-07-03
Re: X7 Fitment Thread
by RayRay Wed Nov 27, 2013 5:15 pm
15x8 0 offset in the front 15x8 -25 in the rear (I should mention I did the X8 front suspension swap.
The front would have no "wheel gap" if i hadn't got carried away with rolling my fenders. the rear end is currently as high as I can get it, I will be ordering taller springs in the near future.
The front would have no "wheel gap" if i hadn't got carried away with rolling my fenders. the rear end is currently as high as I can get it, I will be ordering taller springs in the near future.
RayRay- Posts : 114
Join date : 2013-04-29
Re: X7 Fitment Thread
by RayRay Wed Nov 27, 2013 5:16 pm
I dunno why the picture came out so shitty and half loaded but you can see my wheels.
RayRay- Posts : 114
Join date : 2013-04-29
MitchBrock- Posts : 16
Join date : 2013-07-03
Re: X7 Fitment Thread
by MitchBrock Mon Jan 06, 2014 4:15 am
sorry! the wheels are 15x10-25 with 195/55
MitchBrock- Posts : 16
Join date : 2013-07-03
RayRay- Posts : 114
Join date : 2013-04-29
Re: X7 Fitment Thread
by reynolds_brad Mon Jan 06, 2014 1:41 pm
15 x 10 -18 work equip 03 225 50 15 tires.
Needed to hack the body, hammer the shit out of it, cut out the inner fender and build my own custom flare shape out of fiber glass to get it to fit. Half the upper inner wheel well ended up being cut out and glassed to give full travel. I can lay it down completely on the cut bump stop with no rub. Pretty sure I can fit 235's which I plan to try on the next set of tires. Also plan to rebarrel to larger and move the fronts to 15 by 10 and the rears to 15 by 11.
I didn't want to stretch the shit of of the tire.
Fronts are 15 by 8 for now.
Needed to hack the body, hammer the shit out of it, cut out the inner fender and build my own custom flare shape out of fiber glass to get it to fit. Half the upper inner wheel well ended up being cut out and glassed to give full travel. I can lay it down completely on the cut bump stop with no rub. Pretty sure I can fit 235's which I plan to try on the next set of tires. Also plan to rebarrel to larger and move the fronts to 15 by 10 and the rears to 15 by 11.
I didn't want to stretch the shit of of the tire.
Fronts are 15 by 8 for now.
reynolds_brad- Posts : 4
Join date : 2014-01-06
Re: X7 Fitment Thread
by JJ Wed Apr 30, 2014 1:15 am
15x8.5 -28 centerline knock offs I found at the scrap yard lol. Good enough for now but I'm planning on 15x10 -35 ish offset. Probly gonna make my own flares to fit them.
JJ- Posts : 11
Join date : 2014-03-22
Re: X7 Fitment Thread
by Phleb Wed Sep 03, 2014 6:18 pm
15x9 -15 Grid-V's 195/50/15 front and rear. Lowered on BC coils, still need to drop the front some more.
Phleb- Posts : 8
Join date : 2013-06-08
Location : Seguin, TX
Re: X7 Fitment Thread
by 86cressy Tue Oct 28, 2014 11:50 pm
Love the car Phleb! anything you had to do to make the wheels fit?
86cressy- Posts : 4
Join date : 2014-10-28
Age : 25
Location : VI
Re: X7 Fitment Thread
by Drift Limo Sun May 17, 2015 5:12 pm
JNC wheels 16x9 +15, model JNC010 i think. 215/50 or 55. lowered on ST springs with AGX shocks.
Drift Limo- Posts : 28
Join date : 2014-02-23
Age : 42
Location : North Carolina
Similar topics» 2j fitment
» 2GR-FSE into MX83 swap thread
» 1UZ Swap Thread for the MX83
» My 2JZGTE VVTI Swap Into 92 MX83 Thread
» Cupofresh's mx73: Progress/build thread. LOTS OF PICTURES!!!
» 2GR-FSE into MX83 swap thread
» 1UZ Swap Thread for the MX83
» My 2JZGTE VVTI Swap Into 92 MX83 Thread
» Cupofresh's mx73: Progress/build thread. LOTS OF PICTURES!!!
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|