X7: RCA's, shorter steering arms, notched controle arms. Central NC. $175

i have some front suspension parts for sale that came off of an 1987 MX73 Drift cressida.

i would like to sell it all as a package. $175 Shipped within the lower 48.

Shoot me a PM if you are interested. willing to provide Phone number - Email upon request VIA PM.

CASH or Money Order ONLY!!!! i do NOT accept paypal!

this sale is for:

Roll Center Adjusters.
shorter steering arms.
Notched control arms. (heaps of steering angle)

includes a set of good condition tierod ends (still attached to the steering arms) hardware for the RCA's (longer bolts) and a set of wheel spacers for the front (thats Two wheel spacers, Not four!) i do not have any extra lug-nuts to go with the spacers.

i do not have pictures of the two wheel spacers, they are in a heap of parts at the moment.









-Craig.

You don't have a set of non TEMS front knuckles, do you?

uhh, maybe? im not sure what the "knuckles" are... i might have them on the car.

i also dont know if it was a TEMS car or not. it was completely stripped.

it did not have any electronics on the strut towers but it had all been replaced with aftermarket stuff.

The knuckles are the spindle/shock housing.
The car didn't have headlight washers? And I don't think there are any aftermarket shocks that fit the TEMS housings.

If you have 'em FS could you measure the length of just the shock tube and get me a price shipped to 02760?
I don't need hubs/bearings/shocks ect. Just the spindle/shock housing. To save on shipping.

i do have them but i am keeping them. i want to have an extra set handy incase i make a set of coilovers in the future.

Could we work out some kind of swap deal?
The TEMS ones will work find for coilovers, the shock tube is just a few inches shorter than the regular ones.
Mine are in good condition, just too short for what I need.

i would prefer to keep the ones that i have. they are the same as the ones on the car i DD. sorry.

i may be able to source you a pair from a JY nearby.

No worries man, I understand. I do the same thing with my Alltrac.
I MIGHT have found a set in Fl, so before you look let me check there.

the RCA's have been sold! ill sell the Notched control arms with the steering arms and tie-rod ends together for $100 Shipped!

Technically you need to follow the template for FSs but A. it's a little late and B. you included all the info.

i forgot about the template, sorry!

you can delete the thread if you would like. i dono if anybody's gonna want these.

What is the notched control arms an what all is left? Starting to buy suspension stuff n may be interested

i still have the notched control arms with the shortened steering arms and i believe they each have an outer tie-rod end on them.

i have to find them though.... in my shop somewhere.

you know what a lower control arm is? (these cars done have an upper, so its the only control arm....)

its one of those with a Notch in it where the tie-rod would normally bottom out. so it increases steering angle. basicly for drifting.

RCA's have been sold.

Ya I gotcha, you make them? Or are they xcessive? What would be the difference an would they bolt in? Also do you know how much more angle?

No i did not make them. they were on an 87 cressida drift car that i had parted out. as far as i can tell they should bolt right on. i dont know if he was useing a different tierod setup or anything though. cant say if the tierod ends are OEM or not.

i dont know how much angle exactly but it was a lot. the front tires would rub on full lock even with wheel spacers. lol. car was a riot to drive.